Double-sided adhesive tape 2m

Multi-purpose acrylic gel tape with great grip strength, this double-sided adhesive tape is extra strong and very durable. It has a length of 2 metres x 19 mm wide, with a thickness of 1 mm. Transparent in colour, it is easy to remove and can easily hold items up to 1 KG (2.2 LBS) on a smooth surface. It is made of high viscosity acrylic gel. This tape is resistant to high and low temperatures, it works perfectly in the temperature range of less than 20 degrees and more than 60 degrees. So it is ideal for placing LED strips in places where it receives heat. Easy to cut with scissors, it can be stretched, bent and glued. It is easy to remove and does not damage surfaces (We recommend using with caution on powder coated walls, in case the outer layer may peel off when removed). It adheres to metal, tile, glass, wood, marble, plastic, leather and many other surfaces, both horizontally and vertically and indoors and outdoors. Best adhesion results on glass, tiles and wooden surfaces. It can be applied on almost any smooth and clean surface. Its thickness allows it to be used on porous walls, but improves its performance on smooth walls. It has a wide versatility of uses whether in the kitchen, bathroom, car or office such as: To stick decorative items, fix furniture, glue wall frames, posters... As a replacement for screws, nails, bolts and other projects where you need a clear finish. Fixing exterior or interior mouldings and for mounting LED light channels, aluminium, luminaires and light strips. And even as a substitute for silicone in the profile of shower enclosures. To use it, both surfaces must be cleaned and dried well, there must be no dust, grease, moisture or dirt (ideally clean with alcohol and wait until there are no remains). Carefully peel off a part of the protector and place it so that it is completely fixed, tightening all the way. Avoid contact with the skin and leave no gaps or air bubbles. Remove the outer protector and attach the desired object. Squeeze firmly to ensure a secure hold for about 15 seconds. It is recommended not to hang something heavy within 24 hours of attachment, as within this period of time the bond strength is around 70%. After 24 hours it is around 90%, with maximum effectiveness being achieved after 48 hours. The times may vary less in warm and dry environments, and increase slightly in cold and humid environments. Low weight LED strips can be switched on from the first minute thanks to their heat resistance.